Whether you own a small or large business, you know that keeping your property in good condition adds value to your business. Your brick building can become dirty with soot and grime over time, making your building look disheveled and unappealing.
If you want to maintain your business and keep everything looking nice, hiring a pressure washing service is a great option for you. Not sure how to hire the best team for the job?
Here are the dos and dont’s of pressure washing commercial buildings.
The Do’s of Pressure Washing Commercial Buildings
To ensure the safety of everyone and the best results, it is important to follow the proper dos. Here are some:
Do Use the Right Equipment and Pressure
It is essential to make sure that the right equipment is used, as well as the proper pressure setting. Depending on the surface, the pressure required for washing can range from a low 500 psi to a maximum of 4000 psi. For brick walls, low pressure can be used to avoid damaging the grout, whereas a combination of detergents and high pressure should be used to get rid of stubborn dirt.
If you need assistance with your commercial pressure washing, check out this link at www.brishousewashing.com.
Do Choose the Right Detergents
It is vital to select a detergent specifically designed to be used in a pressure washer. Different areas of the building will require different types of detergents, so be sure to read the instructions carefully to get the most out of your cleaning session. Generally, the detergents used should not contain bleaching or harsh chemicals and should be chosen based on the type of surface being cleaned.
The Don’t of Pressure Washing Commercial Buildings
Certainly, here are the key “Don’ts” to remember when pressure washing commercial buildings. Here are some:
Don’t Use Excessive Pressure
Too much pressure can damage the building’s exterior by causing dents, cracks, and chips to the finer finishes. These damages can be expensive to repair and can eventually lead to water seepage. Too much pressure could also cause the paint to chip Off, leaving an uneven and unattractive look to the building.
It is also important to avoid using excessively hot or cold water when pressure washing. The drastic temperature change could also cause damage to the building, as the paint and other finer finishes may not be able to withstand the chemical reaction that takes place when exposure to such temperatures occurs.
Don’t Use Harsh Chemicals Without Care
Under no circumstances should harsh chemicals such as bleach, acid, and ammonia be used as a cleaning solution without utmost care. While these chemicals may seem like a great cleaner, they can cause serious damage to the exterior of the commercial building and even to the people in the vicinity.
Depending on the location, environmental regulations must be followed, and special types of chemicals may need to be used to prevent any potential damage to the environment or to the health of the people working or walking around the building.
Elevating Curb Appeal and Longevity with Pressure Washing Commercial Buildings
Pressure washing commercial buildings requires considerations to ensure the safety of the workers and the structure of the building. Doing the job properly is essential, and following all of the required instructions is more important than haste. To ensure that the job is done right the first time, seek professional help and take advantage of their expertise.
Don’t delay, get your commercial property sparkling today.
Don’t see what you’re looking for? Feel free to help yourself to our other blog posts while you’re here.
