The mop and bucket method of commercial cleaning has evolved significantly over the past few decades. Is there a way to determine which commercial floor scrubber will work best for your industrial or business facility? Especially in light of the growing demand for enhanced sanitising and cleaning power.
A commercial floor sweeper scrubber is one of the most cost-effective and labour-efficient ways of cleaning your floors. Everything that you need to know about incorporating a machine into the cleaning routines is listed below:
Consider these factors when deciding which scrubber seems to be best for your needs:
You’ll spend more money throughout time and effort to clean a larger area if you purchase a cleaning machine that isn’t up to the task. Remember that this is an approximation; the actual number will depend on the manufacturer. The commercial floor scrubber’s solution system is critical because it distributes the cleaning fluid to the floor. Using either gravity or a pump, the solution tank distributes the chemicals to the water in the solution tank.
A variety of scrubbing systems are available, each with a specific purpose:
- Grout, wonky, or rough floors can benefit from a cylindrical brush, but they are more expensive. As a cylindrical sweeper is designed to include “light sweeping,” it wants to take care of the pre-cleaning.
- Scrubbing with a disc produces more down stress than a cylindrical machine and is better for smooth floors. Pads or brushes can be used for various projects and purposes. With a broad range of pads possible based on how assertive a clean you require, pads produce cleaner, smoother surfaces than brushes. Compared to brushes, places are less environmentally friendly because they must be replaced more frequently. Brushes may be a better option than pads if you’re using your scrubber on a tile or stone floor.
- Once the strategy aligns has served its purpose, and you’ve loosened grime from the ground, the system starts kicking in to recover the dirty, or end up wasting, water. A rear squeegee collects and wipes the liquid, allowing the vacuum to successfully suck up the filthy water through the seal it creates with the vacuum. If you’re cleaning a tiled floor, you’ll need a different type of squeegee:
- Cost-effective gum rubber is the best choice. On smooth floors, it performs well, but on rougher surfaces, anticipate it to wear out quickly.
- Floors in factories, where oil-based grime and dirt collect in large quantities, are ideal candidates for Linatex.
- For the best abrasion resistance, choose polyurethane, which is more expensive.
Commercial floor scrubbers come with a choice of three different propulsion systems. Manual propulsion is used in micro-scrubbers. Brush or pad-assist propulsion is used in smaller scrubbers. The meeting or pad aids in the movement of the machine on the floor. Smaller or ride-on cleaners use traction drive propulsion to propel the ground cleaning machine quickly.
Types of commercial floor sweeper scrubbers
Commercial walk-behind floor scrubbers: There are many different sizes of walk-behind floor sweeper scrubbers. A 17-inch cleaning path is ideal for small areas or areas, such as bathrooms or kitchens. Large floor scrubbers, at least 26 inches wide, can quickly and efficiently clean large areas.
Despite their diminutive size, they come in many shapes and sizes.
Small floor scrubbers can be powered by battery, electric, or battery.
Bathrooms or storage closets benefit significantly from the smaller models, which are ideal for cramped quarters.
